We build powerful DRUM MAGNET (from 1,826 to 10,000+ EFFECTIVE Gauss). Our DRUM MAGNET’ achieves optimal wear resistence and they are equipped with our “BL2” balancing system.

 

Our “BL2” balancing system which completely revolutionizes the installation of the magnetic separator: it allows you to assemble and test the product in half the time. Work can be carried out by a single worker, without any risk to his person and to the product.

Magnetense is a company that, since 20 years ago, deals with technical consultancy, ferrite magnets manufacturing, neodymium magnets manufacturing and production of magnetic separators.

We build among the most powerful and efficient magnets available on the market and are manufatured to be installed in our magnetic systems.

In our business, only very few companies are both raw material and magnetic systems producers, controlling the whole production process, even the innovation side.

Our “Balance 2” drum magnet surely stands out among the magnetic systems we propose: both from the mechanical and magnetic power point of view, it is one of the most innovative products we construct.

WHY CHOOSING “BALANCE 2” MAGNETIC DRUMS?

OUR CUSTOMERS SAYS:

COSTRUZIONI NAZZARENO (Italy)

Project Manager
Mr. Giuseppe Zuccon

1. Our drum jacket was wearing too quickly and we also wanted a magnetic separated that would remove small ferrous parts during the production process..

2. What product did you purchase?
Ferrite magnetic drum.

3. What result did you get?
We achieved the …. removal distance related the test is 170mm which is good. We also noticed the quality of drum is excellent..

4. Would you recommend us?
Yes, we would recommend you.

AUTEFA SOLUTIONS

Manager Head of Technical Department
Mr. Valter Garbi


1. We had no specific problems; we just needed to reduce our maintenance and supply costs.

2. What product did you purchase?
Magnetic rod for our chargers.

3. What result did you get?
We conducted a comparative test on our previous and new magnetic separators and found the Magnatense product has far greater magnetic separation efficiency.

4. Would you recommend us?
Yes, we would recommend you.

CEPI SPA (Italy)

Purchase Manager
Ing. Luca Ceccarelli


1. What product did you purchase?
Neodymium rods.

2. What result did you get?
We found the magnetic performance in our machine significantly improved once we installed your rods. We were able to develop 13,500 Gauss in contact with the pipe and 14,250 on the outside.

3. Would you recommend us?
Yes, we would recommend you because your solution offers outstanding magnetic performance compared to other available systems.

GRESPAN IMPIANTI TECNOLOGICI SRL (Italy)

Technical Manager
Mr. Luca Durante

1. What product did you purchase?
We purchased magnetic plates with the neodymium magnet which we installed on a batch feeder for our hammer mill.

2. What was the problem?
We needed to remove metal parts that could go into the mill.

3. What result did you get?
We successfully removed all unwanted metallic parts.

4. Would you recommend us?
Yes, we would recommend you as suppliers of magnetic systems.

MOLITECNICA SUD SNC (Italy)

Engineering Departure
Mr. Vito Lomorno

1. What was the problem?
We were using a system where we couldn't separate the iron from unwanted parts.

2. What product did you purchase?
Magnetic pulleys and neodymium rings.

3. What result did you get?
We achieved a substantial increment in magnetic separation and an improved customer satisfaction rate from our own customers.

4. Would you recommend us?
Yes, we would recommend you for your technical expertise and customer service.

FALCONI ENGINEERING CM SRL (Italy)

Technical Manager
Mr. Giovanni Bianchi

1. What was the problem?
We could not prevent ferrous parts from accidentally entering the hammer mill.

2. What product did you purchase?
Ferritic magnetic plate.

3. What result did you get?
The magnetic plate we purchased has prevented all ferrous objects from entering the upper part of the mill.

4. Would you recommend us?
Yes, without any doubt we would recommend you and your product.

GIORDANO COSTRUZIONI MECCANICHE (Italy)

Chief Executive
Sig. Giordano Luca

1. What was the problem?
Intercepting iron particles flowing in a pipe used to pneumatically load flour from cisterns to silos.

2. What product did you purchase?
Pressurised magnetic piping.

3. What result did you get?
The pneumatically loaded flour is free from ferrous particles and it is now safe to move to the next process steps. The machinery is protected from ferrous contaminants.

4. Would you recommend us?
Yes, we would definitely recommend you.

BECCARIA SRL (Italy)

Purchase Manager
Sig. Paolo Massano

1. What was the problem?
Our existing magnetic system did not remove iron from the mill feeders at a satisfactory rate.

2. What product did you purchase?
We purchased the Neodymium or ferrite sticks with a 32mm diameter and a 200mm length.

3. What result did you get?
We achieved a significant improvement in the removal rate when compared with the previous system.

4. Would you recommend us?
Yes, I would recommend you.

CIMES SRL (Italy)

Purchase Manager
Sig.ra Stefania Manelli

1. What was the problem?
Compartment in enamel filters.

2. What product did you purchase?
We purchased a magnetic bar with a 32 diameter and 70 mm length.

3. What result did you get?
We obtained good results..

4. Would you recommend us?
Yes, I would recommend you.

“Balance 2” drum magnets have up to 10.000 Gauss magnetic performances.

Magnetic power dipends from the customer’s objective: we always reccomend to pay closer attention not to buy oversized or undersized magnetic separator in relation to your needs.

The performances we offer are effective and
demonstrable (They are calculated by gaussmeter’ probe in contact with the surface of the magnetic drum).

Those performances are not just nominal (as it often happen in this sector, in which many companies guarantee approximately calculated magnetic perfomance).

Our “Balance 2” models are equipped with a balancing system called “BL”, that is now at his second version (BL2). This particular system (protected by copyright) allows you to assemble and test the product in half the time. Work can be carried out by a single worker, without any risk to his person and to the product.

Another fundamental aspect of “Balance 2” concerns the solidity of the components (especially the covering). In fact, drum magnets currently on the market are often subject to deterioration in certain specific areas (i.e. fixing points of the cover) we reinforced using a unique fixing system.

Up to 13.000 Gauss in contact with the surface (verifiable)

Easy mounting system “BL2”

Excellent wear resistance

BALANCE 2 “CUSTOM” MODEL

The “Balance 2″ magnetic drums are widely customisable at magnetic performance level.

We can construct magnetic drums that suit your needs: at magnetic performance level we can certainly succeed where others throw in the towel.

“GRAB” MODEL  

“GRAB” is a standard magnetic drum model of the “Balance 2” Magnetic Series equipped with the following technical characteristics:

  • Distance 0 mm: 2.100 Gauss
  • Distance 15 mm: 1.200 Gauss
  • Distance 30 mm: 910 Gauss
  • Distance 60 mm: 510 Gauss

“GRAB 2” MODEL  

“GRAB” is a standard magnetic drum model of the “Balance 2” Magnetic Series equipped with the following technical characteristics:

  • Distance 0 mm: 4.500 Gauss
  • Distance 15 mm: 3.200 Gauss
  • Distance 30 mm: 2.900 Gauss
  • Distance 60 mm: 1.800 Gauss

Contact Us  

Contact us to find out how Magnetense can help you solve system and productivity challenges. We offer complimentary video, telephone and chat conversations to help you clarify your needs so we can offer cost-efficient solutions.

  • Telephone: +39 015 95 55 439 
  • Email: complete the contact sheet and we shall respond to you

This post is also available in: Italian