Experience Magnetense's new generation of magnetic separation systems:

they are so powerful that no ferrous or unwanted particles can be found in product outputs

i più potenti tamburi magnetici

More than 15.000 Gauss:

Powerful magnetic systems

Screenshot 2019-01-28 11.14.28

No unwanted and ferrous particles

get past our systems

O.Va 2 copia

Indestructible Machines:

The Magnetense system has twice the resistance of common magnetic systems

Our customers says:

COSTRUZIONI NAZZARENO (Italy)

Project Manager
Mr. Giuseppe Zuccon

1. Our drum jacket was wearing too quickly and we also wanted a magnetic separated that would remove small ferrous parts during the production process..

2. What product did you purchase?
Ferrite magnetic drum.

3. What result did you get?
We achieved the …. removal distance related the test is 170mm which is good. We also noticed the quality of drum is excellent..

4. Would you recommend us?
Yes, we would recommend you.

AUTEFA SOLUTIONS

Manager Head of Technical Department
Mr. Valter Garbi


1. We had no specific problems; we just needed to reduce our maintenance and supply costs.

2. What product did you purchase?
Magnetic rod for our chargers.

3. What result did you get?
We conducted a comparative test on our previous and new magnetic separators and found the Magnatense product has far greater magnetic separation efficiency.

4. Would you recommend us?
Yes, we would recommend you.

CEPI SPA (Italy)

Purchase Manager
Ing. Luca Ceccarelli


1. What product did you purchase?
Neodymium rods.

2. What result did you get?
We found the magnetic performance in our machine significantly improved once we installed your rods. We were able to develop 13,500 Gauss in contact with the pipe and 14,250 on the outside.

3. Would you recommend us?
Yes, we would recommend you because your solution offers outstanding magnetic performance compared to other available systems.

GRESPAN IMPIANTI TECNOLOGICI SRL (Italy)

Technical Manager
Mr. Luca Durante

1. What product did you purchase?
We purchased magnetic plates with the neodymium magnet which we installed on a batch feeder for our hammer mill.

2. What was the problem?
We needed to remove metal parts that could go into the mill.

3. What result did you get?
We successfully removed all unwanted metallic parts.

4. Would you recommend us?
Yes, we would recommend you as suppliers of magnetic systems.

MOLITECNICA SUD SNC (Italy)

Engineering Departure
Mr. Vito Lomorno

1. What was the problem?
We were using a system where we couldn't separate the iron from unwanted parts.

2. What product did you purchase?
Magnetic pulleys and neodymium rings.

3. What result did you get?
We achieved a substantial increment in magnetic separation and an improved customer satisfaction rate from our own customers.

4. Would you recommend us?
Yes, we would recommend you for your technical expertise and customer service.

FALCONI ENGINEERING CM SRL (Italy)

Technical Manager
Mr. Giovanni Bianchi

1. What was the problem?
We could not prevent ferrous parts from accidentally entering the hammer mill.

2. What product did you purchase?
Ferritic magnetic plate.

3. What result did you get?
The magnetic plate we purchased has prevented all ferrous objects from entering the upper part of the mill.

4. Would you recommend us?
Yes, without any doubt we would recommend you and your product.

GIORDANO COSTRUZIONI MECCANICHE (Italy)

Chief Executive
Sig. Giordano Luca

1. What was the problem?
Intercepting iron particles flowing in a pipe used to pneumatically load flour from cisterns to silos.

2. What product did you purchase?
Pressurised magnetic piping.

3. What result did you get?
The pneumatically loaded flour is free from ferrous particles and it is now safe to move to the next process steps. The machinery is protected from ferrous contaminants.

4. Would you recommend us?
Yes, we would definitely recommend you.

BECCARIA SRL (Italy)

Purchase Manager
Sig. Paolo Massano

1. What was the problem?
Our existing magnetic system did not remove iron from the mill feeders at a satisfactory rate.

2. What product did you purchase?
We purchased the Neodymium or ferrite sticks with a 32mm diameter and a 200mm length.

3. What result did you get?
We achieved a significant improvement in the removal rate when compared with the previous system.

4. Would you recommend us?
Yes, I would recommend you.

CIMES SRL (Italy)

Purchase Manager
Sig.ra Stefania Manelli

1. What was the problem?
Compartment in enamel filters.

2. What product did you purchase?
We purchased a magnetic bar with a 32 diameter and 70 mm length.

3. What result did you get?
We obtained good results..

4. Would you recommend us?
Yes, I would recommend you.

WHAT MAKES US DIFFERENT?

Magnetense is an engineering, manufacturing and consultancy company.
Magnetense produces both ferrite and neodymium magnets which are used in the construction of magnetic systems for the following industries:
  • Milling and grain
  • Wood
  • Mining
  • Textile
At Magnetense we engineer and manufacture the most efficiently powerful magnets available in the global marketplace.
Unlike standard magnetic systems that are built with low profile contributions and poor magnetic performance, the Magnetense systems are more efficient and powerful. The Magnatense system is more efficient in magnetic field intensity (Gauss); in material efficiency and in iron absorption capacity.
This improved performance means our clients achieve better and faster results with fewer errors.

Magnetic separation? Responding to problems in aging systems

Magnetic separation is complex process that is frequently underestimated by process engineers.

 

At Magnetense our engineers provide technical consultancy services to help your staff solve problems associated with older generation magnetic systems. As systems age they can malfunction due to system breakages, food infiltrations, separation inefficiency and plant downtime.

 

Our engineering staff can also provide your staff with technical and purchasing information on second generation magnetic systems which produce higher quality and faster output and overall increased productivity.

Why our magnetic systems are different?

MORE POWER

More magnetic efficiency

ADVANCED TECHNOLOGIES

New generation magnetic systems surpass the limits and functionality of older systems and keep plants secure and productive.

INDESTRUCTIBLES

Solid systems that are more reliable and have more resistance.

Application sectors

Mining

Milling and grain

Textile

Wood

Contact Us


Contact us to find out how Magnetense can help you solve system and productivity challenges.

We offer complimentary videos, telephone and chat conversation to her you clarify your needs so we can offer cost-efficient solutions.

Call us at 0039 015 95 55 439  

Email: complete the contact sheet and we shall respond you. 

This post is also available in: Italian